Epson EB-4550 User Manual Download

Page: 11 / 156

Name

Function

Rear feet

When setup on a surface such as a desk, turn to extend and
retract to adjust the horizontal tilt.

"Adjusting the Horizontal Tilt"

p.24

Screw hole to fix the
cable cover

Screw hole to fix the cable cover in place.

"Attaching the Cable Cover"

p.35

Ceiling mount fixing
points (four points)

Attach the optional Ceiling Mount here when suspending
the projector from a ceiling.

"Installing the Projector"

p.18

"Optional Accessories"

p.137

Front adjustable foot

When setup on a surface such as a desk, extend the foot to
adjust the position of the image.

"Adjusting the Image Position"

p.24

Control Panel

Name

Function

[

] button

Turns the projector power on or off.

[Source Search]
button

Changes to the next input source that is sending an image.

"Automatically Detect Input Signals and Change the

Projected Image (Source Search)"

p.38

Name

Function

[

]/[

] buttons

•

Displays the Control Panel Lock screen allowing you to
make settings to lock the control panel buttons.

"Restricting Operation"

p.67

•

If pressed when the Configuration menu or the Help
screen is displayed, this button selects menu items and
setting values.

"Using the Configuration Menu"

p.71

"Using the Help"

p.94

[

] button

•

When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.

•

If pressed while projecting analog RGB signals from the
Computer port or the BNC port, you can automatically
optimize Tracking, Sync., and Position.

[

]/[

] buttons

•

Displays a test pattern.

"Displaying a Test Pattern"

p.21

•

If pressed when the Configuration menu or the Help
screen is displayed, this button selects menu items and
setting values.

"Using the Configuration Menu"

p.71

"Using the Help"

p.94

[

] /[ ] buttons

•

Displays the Info menu from the Configuration menu.

"Info Menu (Display Only)"

p.91

•

If pressed when the Configuration menu or the Help
screen is displayed, this button selects menu items and
setting values.

"Using the Configuration Menu"

p.71

"Using the Help"

p.94

[A/V Mute] button

Turns the video and audio on or off.

"Hiding the Image and Sound Temporarily (A/V

Mute)"

p.56

Part Names and Functions

Summary of Contents for EB-4550





























































































































































Search results

Summary of Contents for EB-4550

Reviews:

Related manuals for EB-4550

Brands by name

Popular brands

Epson EB-4550, User Manual

Search results

Summary of Contents for EB-4550

Reviews:

Related manuals for EB-4550

Brands by name

Popular brands