Epson EB-4550, User Manual

Page: 18 / 156

Installation Requirements
The projector supports the following four different projection methods.
Install the projector according to the conditions of the installation location.
•
Project images from in front of
the screen. (Front projection)
•
Project images from behind a
translucent screen. (Rear projec‐
tion)
•
Suspend the projector from the
ceiling and project images from
in front of a screen. (Front/Ceil‐
ing projection)
•
Suspend the projector from the
ceiling and project images from
behind a translucent screen.
(Rear/Ceiling projection)
Warning
•
A special method of installation is required when suspending the projector
from a ceiling (ceiling mount). If installation work is not carried out
correctly, the projector could fall down. This may result in injury or
accidents.
Contact your dealer or the nearest address provided in the Support and
Service Guide if you want to use this installation method.
s
Epson Projector
Contact List
•
If you use adhesives on the Ceiling mount fixing points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the
projector, the projector case may crack causing it to fall from its ceiling
mount. This could cause serious injury to anyone under the ceiling mount
and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to
prevent the screws from loosening and do not use oils or lubricants and so
on.
•
Do not cover the projector's air intake vent or air exhaust vent. If either of
the vents are covered, the internal temperature could rise and cause a fire.
Attention
Do not use the projector on its side. This may cause malfunctions to occur.
Installing the Projector
18