Epson EB-1930, User Manual

Page: 113 / 146

Check Remedy
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s
"Connecting Equipment" p.23
Is the contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s
Image - Contrast p.87
Is the color adjustment set correctly? Adjust the Gamma , RGB , or RGBCMY setting from the Configuration menu.
s
Image - Advanced p.87
s
"Adjusting the Image" p.41
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source) Adjust the
Color Saturation
and
Tint
settings from the Configuration menu.
s
Image
-
Color Saturation
,
Tint
p.87
Images appear dark
Check Remedy
Is the image brightness set correctly? Adjust the Brightness and Power Consumption settings from the Configuration menu.
s
Image - Brightness p.87
s
Settings - Power Consumption p.90
Is the contrast
g
adjusted correctly? Adjust the Contrast setting from the Configuration menu.
s
Image - Contrast p.87
Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer. When
this happens, replace the lamp with a new lamp.
s
"Replacing the Lamp" p.121
Problems when Projection Starts
The projector does not turn on
Check Remedy
Did you press the [
t
] button? Press the [
t
] button to turn the power on.
Problem Solving
113