manualshive.com logo in svg

Epson EB-1420Wi, User Manual

Share
Download
Epson EB-1420Wi User Manual Download Page 217

Check

Remedy

Are you using the projector at a high altitude or in a location subject
to high temperatures?

The screen may become dark when using at high altitude or in a location subject to high temperatures. Although you
cannot make 

Power Consumption

 settings at this time, you can continue to use the projector.

Problems when Projection Starts

The  Projector  Does  Not  Turn  On

Check

Remedy

Did you press the [

t

] power button?

Press the [

t

] power button to turn the power on.

Are all of the indicators off?

The power cord is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cord.

s

 "From Installation to Projection" 

p.53

Check the breaker and so on to ensure power is being supplied.

Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this

does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.

s

 

Epson Projector Contact List

Is the 

Control Panel Lock

 set to 

Full Lock

?

Press the [

t

] button on the remote control. If you do not want to use 

Control Panel Lock

, change the setting to 

Off

.

s

 

Settings

 - 

Control Panel Lock

 

p.178

Is the remote receiver set correctly?

Check the 

Remote Receiver

 from the Configuration menu.

s

 

Settings

 - 

Remote Receiver

 

p.178

Problem Solving

217

Summary of Contents for EB-1420Wi


































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands