Epson EB-1420Wi, User Manual

Page: 111 / 257

When the projector is connected to a computer with a USB cable, you can
operate the computer from the projected screen using the interactive pens
or your finger (EB-1430Wi), just as you would with a mouse. You can
navigate, select, and interact with your computer programs from the
projected screen.
a •
When using multiple displays with Windows 7 and using interactive
features on the secondary display, make the following settings:
- Set the
Pen Operation Mode setting to One User/Pen in the Easy
Interactive Function setting in the projector's Extended menu
(EB-1420Wi).
- Set the
Pen Operation Mode setting to Mode 2 in the Easy
Interactive Function setting in the projector's Extended menu
(EB-1430Wi).
- Go to
Control Panel > Hardware and Sound > Table PC Settings
> Setup to launch the setup program and configure the interactive
features.
If you set up a third display, you cannot use interactive features with
that display.
•
To use computer interactive mode over a network, you need to
install EasyMP Network Projection version 2.85 or later (for
Windows) or 2.83 or later (for OS X), or Quick Wireless version
1.32 or later.
•
When the source is Video , USB1 , or USB2 , you cannot use the
computer interactive mode.
Using Computer Interactive Mode
You can control your computer programs from the projected screen using
computer interactive mode.
a
If you are using OS X, install the Easy Interactive Driver on your
computer the first time you use the interactive features.
s
"Easy Interactive Driver System Requirements (OS X only)"
p.115
s
"Installing Easy Interactive Driver on OS X" p.116
b
Connect the projector to your computer using a USB cable.
Control Computer Features from a Projected Screen (Computer Interactive Mode)
111