3 FUNCTION OPTION GENERATOR FOG6011
E0C6011 DEVELOPMENT TOOL MANUAL
EPSON
9
*** OPTION NO.1 ***
--- << DEVICE TYPE & LCD POWER VREG >> ---
1. E0C6011 LCD 3V
2. E0C6011 LCD 4.5V
PLEASE SELECT NO.(1) ? 1
1. E0C6011 LCD 3V SELECTED
1 Device type and LCD voltage
Select the chip specification.
There are two models: 3-V LCD type and 4.5-V
LCD type.
*** OPTION NO.2 ***
--- << OSC1 SYSTEM CLOCK SELECT >> ---
1. INTERNAL RESISTOR OSC1=65KHZ
2. INTERNAL RESISTOR OSC1=130KHZ
3. INTERNAL RESISTOR OSC1=195KHZ
4. INTERNAL RESISTOR OSC1=260KHZ
PLEASE SELECT NO.(1) ? 1
1. INTERNAL RESISTOR OSC1=65KHZ SELECTED
2 OSC1 system clock
The E0C6011 has a CR oscillation circuit with
resistor and capacitor built-in. Four frequencies are
available.
3.3 Option Specifications and Selection Message
Screen that can be selected as function options set on the E0C6011 are shown below, and their specifications
are also described.
*** OPTION NO.3 ***
--- << INTERRUPT NOISE REJECTOR K00-K03 >> ---
1. USE
2. NOT USE
PLEASE SELECT NO.(1) ? 1
1. USE SELECTED
Select whether noise rejector will be supplemented to
the input interruptor of K00–K03.
When "Use" is selected, the entry signal will pass the
noise rejector, and occurrence of interrupt errors due
to noise or chattering can be avoided. Note, however,
that because the noise rejector performs entry signal
sampling at 4 kHz, "Not Use" should be selected
when high speed response is required.
3 Interrupt noise rejector
