-12
R4C4600
html.bk
Rev.C
CONTR. FM
A5 s i ze
7/24/01
L
Pr oof Si gn- of f :
ABE Y. Azuma, Nagas awa
Takahas hi
ABE S. Hal vor s on
Font
One of these fonts selected in the default setting is corresponding
to Others on the control panel. You can select the following fonts
directly on the control panel: Draft, Roman, Sans Serif, Courier,
Prestige and Script.
Manual feed wait time
This setting allows you to set the amount of wait time between
when paper is inserted into the paper guide and it is fed. If the
paper feeds before you can adjust its position properly, you
should increase the wait time.
Buzzer (beeper)
The printer beeps when an error occurs. See “Using the Error
Indicators” for more information on printer errors. If you do not
want the printer to beep when an error occurs, turn off this setting.
Overlapping forms
This setting takes effect only when the skip-over-perforation
setting is on. When overlapping-forms setting is on, the printer
lifts up the print head each time it makes a one-inch margin with
the skip-over-perforation feature. You need to turn on both the
overlapping-forms and the skip-over-perforation settings when
you use overlapping forms.
Changing default settings
Follow these steps to enter the default-setting mode and change
the printer’s default settings:
