-17
R4C4600
html.bk
Rev.C
PAPER. FM
A5 s i ze
7/24/01
R
Pr oof Si gn- of f :
ABE Y. Azuma, Nagas awa
Takahas hi
ABE S. Hal vor s on
1. When printing is finished, the printer advances the
perforation of the final printed page to the tear-off position.
2. Tear off all printed pages using the tear-off edge of the printer
cover.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in “Adjusting the tear-off position”.
3. When you resume printing, the printer feeds the paper back
to the top-of-form position and begins printing. (You can also
manually feed the paper back to the top-of-form position by
pressing the
Tear Of f /Speci al Paper
button.)
Removing continuous paper
Follow these steps to remove continuous paper from the printer:
1. Press the
Tear Of f /Speci al Paper
button after the printer
finishes printing your document. The printer advances the
paper to the tear-off position.
Note:
When the auto tear-off function is on, the printer advances the paper
perforation to the tear-off position automatically. You can turn on
the auto tear-off function by changing the default settings. See
“Changing default settings” for instructions.
2. Tear off the printed pages.
3. Press the
Load/Ej ect
button to feed the continuous paper
backward out of the printer and into the standby position.
4. To completely remove continuous paper from the printer,
open the sprocket covers. Remove the paper from the tractor
unit, and then close the sprocket covers.
