-11
R4C4600
html.bk
Rev.C
TROUB. FM
A5 s i ze
7/24/01
R
Pr oof Si gn- of f :
ABE Y. Azuma, Nagas awa
Takahas hi
ABE S. Hal vor s on
The paper is old or creased.
Use only new, clean sheets of paper.
You may not be using the
right type of paper for the
cut-sheet feeder. For
example, your paper may be
too heavy or too light.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See
“Paper” for
information on
the paper
specifications.
When the printer ejects the paper, the
Paper Out
flashes and
the
Paus e
light comes on.
Cause
What to do
The printer has not fully
ejected your paper.
Remove the paper by hand; the
Paper
Out
light goes out. Press the
Paus e
button to resume printing.
When you try to load single-sheet paper manually, the printer
loads the paper from the cut-sheet feeder.
Cause
What to do
The paper was not properly
loaded in the paper guide.
Load the paper in the paper guide as
“Loading single sheets from the front”.
One page of your document is printed on two pages.
Cause
What to do
The paper size setting in
your application software
does not match the size of the
paper loaded in the printer.
Adjust the paper size setting in your
application or the printer driver.
The printer does not load the paper you want when you switch
between the cut-sheet feeder and the tractor.
