-19
R4C4600
html.bk
Rev.C
TROUB. FM
A5 s i ze
7/24/01
R
Pr oof Si gn- of f :
ABE Y. Azuma, Nagas awa
Takahas hi
ABE S. Hal vor s on
The printer does not print the font you selected on the control
panel or in the default settings.
Cause
What to do
Software settings override
settings you make in the
control panel or in the
default settings.
Use your software to select the font.
Printing starts too high or too low on the page.
Cause
What to do
The paper size settings in
your application software do
not match the size of the
paper loaded in the printer.
Change the paper size settings in your
application software or printer driver
to match the size of the paper you are
using.
The top margin or loading
position setting is incorrect.
Check and adjust the top margin and
loading position settings in your
software, or adjust the top-of-form
position using the Micro Adjust
function. See “Printable area” and
“Adjusting the top-of-form position”.
However, settings made in Windows
applications override settings made on
the control panel.
Top margin and loading
position settings made in
your Windows applications
override settings you make
in the SelecType mode.
Use your application software to make
these settings.
Note:
If you want to eliminate the top
margin and print at the very top of
the page, adjust the top margin in
your Windows application little by
little until text is printed at the very
top of the page.
