-40
R4C4600
html.bk
Rev.C
PAPER. FM
A5 s i ze
7/24/01
L
Pr oof Si gn- of f :
ABE Y. Azuma, Nagas awa
Takahas hi
ABE S. Hal vor s on
3. Load paper. Press the
Load/Ej ect
button to advance
continuous paper to the current top-of-form position. If
necessary, lift up the printer cover so you can see the paper
position.
4. Hold down the
Paus e
button for about three seconds. The
Paus e
light starts flashing and the printer enters the Micro
Adjust mode.
5. Press the
LF/FF
D
button to move the top-of-form position
down on the page, or press the
Load/Ej ect
U
button to move
the top-of-form position up on the page.
Note:
❏
The printer has a minimum and a maximum top-of-form
position. If you try to adjust it beyond these limits, the printer
beeps and stops moving the paper.
❏
When the paper reaches the default top-of-form position, the
printer also beeps and stops moving the paper briefly. You can
use the default setting as a reference point when adjusting the
top-of-form position.
6. After you set the top-of-form position, press the
Paus e
button
to exit the Micro Adjust mode.
