Epson C823781 Administrator'S Manual Download

Page: 164 / 258

152

Settings for NetWare Server

3. Install the appropriate Client Software on client workstations.

Make sure they install NDPS.

4. Install printer drivers on client workstations. See the printer

manual for the installation.

Note:

❏

Do not install the printer drivers via the NetWare server.

❏

Do not add printers and do not install printer drivers using
Novell Print Manager (NWPMW32.EXE).

Creating an NDPS Manager

1. Run NetWare Administrator (NWADMN32.EXE) on the

client machine. The main browser window appears.

2. To create an NDPS Manager, click the Directory context icon,

and then select

Create

from the Object menu.

3. Select

NDPS Manager

from the list.

4. Enter the NDPS Manager name in the NDPS Manager Name

field.

5. Browse the Resident Server and select where you want the

NDPS Manager assigned.

6. Browse the Database Volume and select where you want the

NDPS Manager database assigned.

7. Click

Create

. The NDPS Manager icon appears in the main

browser window.

8. Type

LOAD NDPSM

at the server console, and then select the

NDPS Manager you have created.

Summary of Contents for C823781



































































































































































































































































Search results

Summary of Contents for C823781

Reviews:

Related manuals for C823781

Brands by name

Popular brands

Epson C823781, Administrator'S Manual

Search results

Summary of Contents for C823781

Reviews:

Related manuals for C823781

Brands by name

Popular brands