manualshive.com logo in svg

Epson C823781, Administrator'S Manual

Share
Download
Epson C823781 Administrator'S Manual Download Page 124

112

Installing the Printer Driver

Note:

If the Add Printer wizard prompts you to select either 

Keep 

existing driver

 or 

Replace existing driver

, be sure to select the 

Replace existing driver

 radio button.

8. Click 

Finish

 and follow the on-screen instructions to complete 

the setup.

When you print using Microsoft Network Shared printing in 
the Windows XP/Server 2003/2000/NT environment, see 
“Using the NET USE command” below for more details.

Using the NET USE command

If you are running Windows XP/Server 2003/2000/NT and using 
NetBIOS to connect to the printer, we recommend that you use 
the NET USE command, as follows:

1. Click 

Start

, point to 

Control Panel

, and then point to 

Network Connections

. Select 

Local Area Connections

.

2. Click the 

Properties 

button.

3. Check that 

Client for Microsoft Networks

 is installed. If it is 

not installed, click 

Install

 to install it.

4. Run the command prompt and enter the following command:

NET USE

 

printer port

: \\

NetBIOS name of print server

\

Device 

name of print server

Selecting the port 

1. Click 

Start

, and then click 

Printers and Faxes

.

2. Right-click the printer icon and then select 

Properties

.

3. Click the 

Ports

 tab and then select the port you have set with 

the NET USE command.

Summary of Contents for C823781



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands