No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
TM
Printer Driver
User’s Manual
Revision
L
NEXT
37
SHEET
36
10.3.5.Reverse
Specification Remarks
Driver name
EPSON TM-L90 Reverse
Version3.03
Supported Printer
font name
Not Supported
Supported printer
font name for bar
Code
Not Supported
Supported printer
font name for
Special function
Not Supported
Supported printer
font name for
Extended special
function
Not Supported
Supported
resolution
203 x 203
Supported paper
size
80 x 25.4mm 80 x 50.8mm
80 x 76.2mm 80 x 101.6mm
60 x 25.4mm 60 x 50.8mm
60 x 76.2mm 60 x 101.6mm
38 x 25.4mm
XX x YY (L90 Label Reverse)
Win95/98only
User-Defined
(28.3
×
22.4 to 70.1
×
98.6mmm)
Supported paper
source
Plural [Cut]
Plural [No Cut]
Single [Cut]
Supported print
Quality
None
Notes on upside-down printing
1.
The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The
maximum length of the page is 297mm.
2.
If XX x YY (TM-L90 Label Reverse) is selected for paper size, specify the number of dots for the printing area of the
upside-down printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set
freely.
(Default is the printing area for 80 mm width paper.)
[TM-L90 Label Reverse]
Width=576
Height=788
3.
When the paper size XX x YY (TM-L90 Label Reverse) is selected and if there is no definition described in 1., use the
value of the printer that has been already defined (the paper size selected from the printer property sheet) as the printing
area to process the upside-down printing.
4.
Be sure that the paper size selected from the printer property sheet and the paper size selected by an
application are the same. If they are different, horizontal and vertical lengths of printing paper might not be
obtained correctly and the upside-down priting might not be done correctly.
