No
EPSON
TITLE
EPSON Advanced Printer Driver for TM series
TM
Printer Driver
User’s Manual
Revision
L
NEXT
34
SHEET
33
10.3.3.Reverse
Specification Remarks
Driver name
EPSON TM-L90 Reverse
Version3.03
Supported Printer
font name
Not Supported
Supported printer
font name for bar
Code
Not Supported
Supported printer
font name for
Special function
Not Supported
Supported printer
font name for
Extended special
function
Not Supported
Supported
resolution
203 x 203
Supported paper
size
80 x 297mm(203)
60 x 297mm
38 x 297mm(203)
XX x YY (L90 Receipt Reverse)
Win95/98only
User-Defined
(52.6x25.4 to 72.1x297 mm)
Supported paper
source
Form[No cut]
Form[Cut]
Form[No feed]
BMPlural[No cut]
BMPlural[Cut]
BMSingle[Cut]
Supported print
Quality
None
Notes on upside-down printing
1.
The driver enables to rotating the printing result 180 degrees to perform upside-down printing on each page. The
maximum length of the page is 297mm.
2.
If XX x YY (TM-L90 Receipt Reverse) is selected for paper size, specify the number of dots for the printing area of the
upside-down printing in the section of TMCTRL.INI below. Then the area for the upside-down printing can be set
freely.
(Default is the printing area for 80 mm width paper.)
[TM-L90 Receipt Reverse]
Width=576
3.
When the paper size XX x YY (TM-L90 Receipt Reverse) is selected and if there is no definition described in 1., use the
value of the printer that has been already defined (the paper size selected from the printer property sheet) as the printing
area to process the upside-down printing.
4.
Be sure that the paper size selected from the printer property sheet and the paper size selected by an
application are the same. If they are different, horizontal and vertical lengths of printing paper might not be
obtained correctly and the upside-down priting might not be done correctly.
