Problem Solving
115
5
5
5
5
5
5
5
5
5
5
5
The printout has extra blank lines between lines of text.
Cause
What to do
Two line feed commands are
being sent at the end of each
line of text, because the
printer’s auto line feed setting
is on.
Turn off the auto line feed setting using
the printer’s SelecType mode. See
“Changing the settings in SelecType
mode” on page 94 for details.
The line space setting in your
application software is
incorrect.
Adjust the line space setting in your
application software.
The printer prints strange symbols, incorrect fonts, or other
inappropriate characters.
Cause
What to do
Your printer and computer
are not communicating
correctly.
Make sure that you use the correct
interface cable and that the
communications protocol is correct. See
“Electronic” on page 164 and your
computer documentation.
The wrong character table is
selected in your software.
Select the correct character table using
your software or SelecType mode. The
character table setting in your software
overrides settings made in the
SelecType mode.
The printer you want to use is
not selected in your software
Choose the correct printer from the
Windows desktop or in your
application before printing.
Your application software is
not configured correctly for
your printer.
Make sure that your application
software is configured correctly for
your printer. See your application
documentation. If necessary, install or
reinstall the printer driver software as
described in the
User’s Guide
.
