Control Panel
87
4
4
4
4
4
4
4
4
4
4
4
Page length for rear tractor
This setting allows you to set the page length (in inches) for the
continuous paper loaded on the rear push tractor.
Page length for front tractor
This setting allows you to set the page length (in inches) for the
continuous paper loaded on the front push tractor.
Skip over perforation
When you turn on this feature, the printer provides a one-inch
(25.4 mm) margin between the last line printed on one page and
the first line printed on the next page. Because most application
program margin settings override margin settings from the
control panel, you should use this setting only if you cannot set
your top and bottom margins using your application.
Line spacing
You can select
1/6 inch
or
1/8 inch
for line spacing.
Left margin
This setting allows you to set the margin (in columns) from the
left edge. The margin is set in columns of 10 cpi, regardless of
the pitch that is currently selected.
Right margin
This setting allows you to set the margin (in columns) from the
right edge. The margin is set in columns of 10 cpi, regardless of
the pitch that is set.
