Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Reference Manual Download

Page: 171 / 188

Product Information

171

❏

Do not load thick paper, such as multipart forms with more
than seven parts, on the rear tractor.

❏

Form sheets of continuous multi-part forms should be
securely joined together along the left and right edges by
crimping or spot-gluing. See the illustration below for
details.

spot-gluing on both sides

crimping on both sides

A 25.4 mm (1 inch) or less

A 76.2 mm (3 inches) or less

B printing side

Summary of Contents for C11C605001 - DFX 9000 B/W Dot-matrix Printer





























































































































































































Search results

Summary of Contents for C11C605001 - DFX 9000 B/W Dot-matrix Printer

Reviews:

Related manuals for C11C605001 - DFX 9000 B/W Dot-matrix Printer

Brands by name

Popular brands

Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer, Reference Manual

Search results

Summary of Contents for C11C605001 - DFX 9000 B/W Dot-matrix Printer

Reviews:

Related manuals for C11C605001 - DFX 9000 B/W Dot-matrix Printer

Brands by name

Popular brands