Epson BrightLink 710Ui User Manual Download Page 168

Page: 168 / 309

168

You see the main toolbar on the side and the projector control toolbar on the bottom of the projected
image.

To move the main toolbar to the other side of the screen, tap the

arrow on the opposite side of

the screen.

Note:

You can use the pen or your finger to move the arrow icon up or down to reposition the

toolbar.

To switch to one of the other interactive modes, do one of the following:

• To switch to built-in whiteboard mode, select

• To switch to PC Interactive mode, select

, then select

Note:

You can also press the

Pen Mode

button on the remote control to switch between modes.

Summary of Contents for BrightLink 710Ui






















































































































































































































































































































Search results

Summary of Contents for BrightLink 710Ui

Reviews:

Brands by name

Popular brands

Epson BrightLink 710Ui, User Manual

Search results

Summary of Contents for BrightLink 710Ui

Reviews:

Brands by name

Popular brands