Epson AL-C500 Series User Manual Download Page 88

Page: 88 / 225

Item

Settings (default in bold)

Power Off Timer

, Off

Time to Off

30, 60, 120, 180, 240, 360,

480

Min

Not available in PS3.

Not available when a USB cable is connected or an optional interface card is installed.

is not selected as the

Region Setting

for the initial settings, the default value is

Off

Preheat Mode

When this setting is set to

, the printer enters the preheat mode and reduces power consumption. In

this mode, the printer returns to the ready status faster than from sleep mode or deep sleep mode, but
uses more power.

Time to Preheat

Specifies the length of the time until the printer enters the preheat mode when the

Preheat Mode

set to

. The printer does not enter the preheat mode if the specified time in

Time to Preheat

is the

same as or longer than that of

Time to Sleep

Time to Sleep

Specifies the length of the time until the printer enters the sleep mode or deep sleep mode if there are
no button operations and no jobs to be printed.

Deep Sleep Mode

When this setting is set to

, the printer switches into the deep sleep mode at the time specified in the

Time to Sleep

setting if the printer is not operated or receives no jobs. In the deep sleep mode, the

Wake Up/Sleep

button lights and more power is saved than when in the sleep mode. The printer

switches to the deep sleep mode only when the

AppleTalk

WSD

IPv6

, and

IPSec

settings in

Network Menu

and

RAM Disk

Setup Menu

are set to

Off

To recover from the deep sleep mode, press the

Wake Up/Sleep

button. The printer recovers

automatically when it receives a print job.

Power Off Timer

(Power Off mode)

When this setting is set to

, the printer automatically turns off at the time specified in the

Time to

Off

setting. The printer does not enter the power off mode if it is receiving or sending data.

AL-C500 Series User's Guide

Using the Control Panel

Summary of Contents for AL-C500 Series


































































































































































































































Search results

Summary of Contents for AL-C500 Series

Reviews:

Related manuals for AL-C500 Series

Brands by name

Popular brands

Epson AL-C500 Series, User Manual

Search results

Summary of Contents for AL-C500 Series

Reviews:

Related manuals for AL-C500 Series

Brands by name

Popular brands