Epson Aculaser M2300 Series User Manual Download Page 34

Page: 34 / 167

Envelopes

Available envelopes:

❏

Envelopes that have no glue or no tape

Cautions

Do not use any window envelope other than the ones designed for laser printers. The plastic on
most window envelopes will melt.

Available paper source:

❏

MP tray

Printer driver settings:

Paper Size:

MON, C10, DL, C5, C6, IB5

Paper Source:

MP Tray

Note:

❏

Set the envelope with the printable surface facing up.

❏

Depending on the quality of envelopes, the printing environment, or the printing procedure,
envelopes might be wrinkled. Make a trial print run before you print on a lot of envelopes.

❏

Duplex printing is not available for envelopes.

Thick paper

Available paper source:

Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide

Printing Tasks

Summary of Contents for Aculaser M2300 Series








































































































































































Search results

Summary of Contents for Aculaser M2300 Series

Reviews:

Related manuals for Aculaser M2300 Series

Brands by name

Popular brands

Epson Aculaser M2300 Series, User Manual

Search results

Summary of Contents for Aculaser M2300 Series

Reviews:

Related manuals for Aculaser M2300 Series

Brands by name

Popular brands