❏
Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
❏
Never push objects of any kind through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock.
❏
Do not sit or lean on the printer. Do not put heavy objects on the printer.
❏
Do not use any kind of combustible gases in or around the printer.
❏
Never force the printer’s components into place. Although the printer is designed to be sturdy,
rough handling can damage it.
❏
Do not leave jammed paper inside the printer. This can cause the printer to overheat.
❏
Never spill liquid of any kind on the printer.
❏
Adjust only those controls that are covered by the operating instructions. Improper adjustment of
other controls may result in damage and may require repair by a qualified service representative.
❏
Do not turn off the printer:
- After turning on the printer, wait until the Ready light is on.
- While the Data light is on or flashing.
- While printing.
❏
Avoid touching the components inside the printer unless instructed to do so in this guide.
❏
Follow all warnings and instructions marked on the printer.
❏
Except as specifically explained in the printer’s documentation, do not attempt to service this
printer yourself.
❏
Periodically disconnect the plug from the electrical outlet and clean the blades.
❏
Do not disconnect the plug while the printer is on.
❏
If the printer will not be used for a long time, disconnect the plug from the electrical outlet.
❏
Unplug this printer from the wall outlet before cleaning.
❏
Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
Handling consumable products and maintenance parts
❏
Do not burn used consumable products or maintenance parts because they might explode and
injure someone. Dispose of them according to local regulations.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
Safety Instructions
15
