Epson AcuLaser CX11N Basic Manual Download Page 14

Page: 14 / 144

Handling Paper and Originals

Paper Cassette Unit

The optional Paper Cassette Unit can hold the following types and sizes of paper.

Placing Originals for Copying and Scanning

You can place originals on either the document table or the Auto Document Feeder
(CX11NF only), depending on the type of the original.

Note:

If you place originals on both the Auto Document Feeder and the document table, only
the documents in the Auto Document Feeder are scanned.

Coated paper

A4, A5, B5, Letter (LT),
Government Letter (GLT),
Half Letter (HLT), Legal (LGL),
Government Legal (GLG), F4,
Executive (EXE)

Custom-size paper:
3.54 in.

4.33 in. (minimum) to

8.66 in.

14 in. (maximum)

Total stack thickness: 0.8 in.

Paper Type

Paper Size

Capacity

Plain paper

A4, Letter (LT)

Up to 500 sheets in a
cassette
Total stack thickness: 2.2 in.

Paper type

Paper size

Capacity

Basic.book Page 14 Monday, August 22, 2005 12:35 PM

Summary of Contents for AcuLaser CX11N

















































































































































Search results

Summary of Contents for AcuLaser CX11N

Reviews:

Related manuals for AcuLaser CX11N

Brands by name

Popular brands

Epson AcuLaser CX11N, Basic Manual

Search results

Summary of Contents for AcuLaser CX11N

Reviews:

Related manuals for AcuLaser CX11N

Brands by name

Popular brands