Epson AcuLaser C9200 Series User Manual Download Page 250 | Manualshive

Page: 250 / 271

background image

Note:

The PCL5/PCL6 printer driver and EPSON Status Monitor cannot be used at the same time.

Installing the PCL5/PCL6 printer driver

Note:

❏

Installing the printer software for Windows XP or 2000 may require administrator privileges. If
you have problems, ask your administrator for more information.

❏

Turn off all virus protection programs before installing the printer software.

❏

The examples in this section are from the Windows XP operating system. They may vary in
appearance from what actually appears on your screen; however, the instructions are the same.

1. Make sure that the printer is turned on.

2. Double-click

SETUP.EXE

. The End User License Agreement dialog box appears.

3. Select the name of your printer, then click

OK

.

4. Read the license agreement, then click

Accept

.

The EPSON Printer Utilities Setup dialog box appears, and the program searches for the printer
and automatically configures the port.

Note:

If you are using a parallel interface cable, click

Cancel

, and then click

OK

. The parallel port is

configured automatically.

5. When the installation is complete, click

OK

.

After the installation is done, click

Printer Properties

to make the appropriate settings.

Note:

If you want to change the settings, you can access the PCL5/PCL6 printer driver by clicking

Document

Default

.

Accessing the PCL5/PCL6 printer driver

You can change the PCL5/PCL6 printer settings in the PCL5/PCL6 printer driver. To access the
printer driver, see “Accessing the printer driver” on page 216.

EPSON AcuLaser C9200 Series User's Guide

About the PCL5/PCL6 Printer Driver

250

«
...
248
249
250
251
252
...
»

Summary of Contents for AcuLaser C9200 Series
















































































































































































































































































Reviews:

No comments

Related manuals for AcuLaser C9200 Series

Brand: Oki Pages: 2

Brand: VASTEX Pages: 15

Brand: Radio Shack Pages: 62

Brand: JICCODA Pages: 46

Brand: Xerox Pages: 14

Nimbie Sidekick NK50Y

Brand: Acronova Technology Pages: 2

Brand: Pantum Pages: 126

Brand: SPRT Pages: 13

Brand: Oki Pages: 45

Brand: Kyocera Pages: 24

Brand: Oki Pages: 424

Brand: Unytouch Pages: 12

Brand: Graphic Products Pages: 28

Brand: SEWOO Pages: 24

Brand: Sagem Pages: 154

Brand: Paaasonic Pages: 14

Delta Rostock mini G2

Brand: Geeetech Pages: 85

Heated Bed Upgrade Kit

Brand: Ultimaker Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands