manualshive.com logo in svg

Epson 8300NL - PowerLite XGA LCD Projector, User Manual

Share
Download
Epson 8300NL - PowerLite XGA LCD Projector User Manual Download Page 94

94

Maintaining the Projector

Replacing the Lamp

The projection lamp typically lasts from 2000 to 3000 hours, 
depending on the Brightness Control setting used (see page 64). 
Selecting the low brightness setting helps extend the lamp’s life.

It is time to replace the lamp when: 

■

The projected image gets darker or starts to deteriorate.

■

The message 

LAMP REPLACE

 appears on the screen and the 

lamp warning light 

 flashes orange.

■

The lamp warning light 

 flashes red (the lamp is burnt out).

Contact your dealer or call EPSON at (800) 873-7766 in the United 
States for a replacement lamp. Request part number 

V13H010L23

. In 

Canada, please call (800) 463-7766 for dealer referral.

Follow these steps to replace the lamp:

1. Turn off the projector.

2. When the power light stops flashing, unplug the power cord.

3. Let the projector cool for at least half an hour (if it has been on). 

The lamp is extremely hot immediately after use. 

4. If the projector is mounted on the ceiling, remove the rear cover. 

note

You can check how long 
the lamp has been in use 
(see page 96).

Lamp life results will vary 
depending on 
environmental conditions 
and usage. Turn the 
projector off when not in 
use. Continuous 24-hour-
a-day use may reduce the 
overall life of this product.

warning

Let the lamp cool fully 
before replacing it. 

In the unlikely event that 
the lamp has broken, small 
glass fragments may be 
present and should be 
removed carefully to avoid 
injury.

Release tab to 
remove rear cover

Summary of Contents for 8300NL - PowerLite XGA LCD Projector











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands