Epson 8300NL - PowerLite XGA LCD Projector, User Manual

Page: 101 / 138

Solving Problems
101
Use this table to interpret the projector’s status lights, then follow the instructions provided:
Status lights = on = flashing = off
Light Description and solution
If no lights are on, make sure the power cord is connected securely both at the
power outlet and the projector. If you have just replaced the lamp, make sure the
cover is securely fastened
.
When the power light is orange, the projector is in sleep mode. Press the Power
button to turn it on.
When the power light is flashing green, the projector is warming up. Wait for the
image to appear.
When the power light is green, the projector is operating normally.
When the power light is flashing orange, the projector is cooling down. Do not
unplug it until the light stops flashing and remains orange. If you want to turn it
back on, wait until the light stops flashing.
When the power and temperature lights are flashing, the projector is getting too
hot, but you can continue running it in this condition.
Verify that the air filter is not clogged. Clean or replace it as described on page 91.
Make sure the room temperature is not above 95
°
F (35
°
C) and there is plenty of
space around and under the projector for ventilation.
Orange
Green
Green
Orange
Red
Orange