Epson 8300NL - PowerLite XGA LCD Projector, User Manual

Page: 46 / 138

46
Giving Your Presentation
Activating and Using the Remote
Control
The remote control has an on/off switch on its side, as shown. Before
using the remote, make sure batteries are installed as described on
page 50, then push up on the on/off switch to turn it on.
Turn off the remote control before transporting or storing it; this
prevents the batteries from discharging if something presses against
one of the buttons.
Here are some additional tips:
■
Point the remote control either at the front or back of the
projector, or at the screen.
■
Stand within about 30 feet of the projector. If you want to operate
the projector from a greater distance, a remote control cable set is
available (see page 12).
■
When presenting in a darkened room, press the light button to
make the buttons on the remote light up temporarily.
■
Avoid using the remote under bright fluorescent lamps or in
direct sunlight, or the projector may not respond properly.
On/off switch
note
If the pointer button is
pressed longer than 10
seconds, the remote control
stops operating to conserve
power. Releasing the button
resumes normal operation.