manualshive.com logo in svg

Epson 8300NL - PowerLite XGA LCD Projector, User Manual

Share
Download
Epson 8300NL - PowerLite XGA LCD Projector User Manual Download Page 92

92

Maintaining the Projector

Cleaning the Air Intake Filters

To clean the air intake filters, follow these steps:

1. Turn off the projector and unplug the power cord.

2. Use a computer vacuum to clean the filters. If you don’t have one, 

gently clean the filters with a soft brush, such as an artist’s 
paintbrush.

3. If the dirt is difficult to remove or a filter is broken, replace the 

filters as described in the next section. Contact your dealer or call 
EPSON at (800) 873-7766 in the United States to obtain new 
ones. In Canada, please call (800) 463-7766 for dealer referral.

Replacing the Filters

1. Turn the projector over (unless it’s ceiling-mounted). 

2. Remove the filters by sliding them out to the sides.

note

When you get a replacement 
lamp for your projector, new 
air filters are included. You 
should replace the filters 
when you replace the lamp.

Summary of Contents for 8300NL - PowerLite XGA LCD Projector











































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands