Epson 6100i - PowerLite XGA LCD Projector User Manual Download Page 92

Page: 92 / 132

Maintaining the Projector

Follow these steps:

1. Turn off projector and unplug the power cord.

2. Turn projector upside down.

3. Remove the air filter by pushing down on the two tabs to

release them.

4. Remove the air filter by pulling the center of air filter straight out.

5. Insert the new air filter with the tab facing the front of the

projector.

6. Close the air filter cover.

7. Reset the air filter timer as described in the next section.

Resetting the Air Filter Timer

1. Plug the projector in and turn it on.

2. Press the

button on the remote control, select

Reset Air

Filter Time

from the Reset menu, then press

Enter

3. When you see the confirmation message, select

Yes

, then press

Enter

4. When you’re finished, press

to exit the menu system.

note

If the air filter has been
stained by tobacco smoke, it
cannot be cleaned. Replace
the filter.

note

The air filter usage timer
shows 0H until you’ve used
the filter for at least 10
hours.

Summary of Contents for 6100i - PowerLite XGA LCD Projector





































































































































Search results

Summary of Contents for 6100i - PowerLite XGA LCD Projector

Reviews:

Related manuals for 6100i - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 6100i - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 6100i - PowerLite XGA LCD Projector

Reviews:

Related manuals for 6100i - PowerLite XGA LCD Projector

Brands by name

Popular brands