Epson 6100i - PowerLite XGA LCD Projector, User Manual

Page: 55 / 132

Configuring the Projector
55
2. Use the pointer button to highlight menu items, then press
the
Enter
button to select from any of the following options:
■ Auto Setup
(computer images)
Leave this setting
On
to automatically optimize the computer
image when you switch to a computer source. Turn it
Off
if
you want to save adjustments you have made to the video
settings below.
■ Tracking
(computer images)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals. See page 106 for more information about adjusting
the tracking setting.
■ Sync.
(computer images)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 106 for more information about adjusting the sync.
setting.
■ Position
Use the pointer button to move the image on the screen
left, right, up, or down.
■ Computer1 Input
Selects the signal from equipment connected to the
Computer1
port. If your image colors look wrong, try
changing this setting from
Auto
to
RGB
for computer or
RGB video sources, or to
Component Video
for component
video sources.
■ Computer2 Input
Selects the signal from equipment connected to the
Computer2
port. If your image colors look wrong, try
changing this setting from
Auto
to
RGB
for computer or
RGB video sources, or to
Component Video
for component
video sources.
■ Video Signal
(composite and S-Video)
Leave this setting at
Auto
unless you are using a 60-Hz PAL
system (select
PAL60
).
note
You can also use the remote
control’s
Auto
button to
automatically reset the
projector’s tracking, sync,
and position settings.