2-4
Printing on Continuous Paper
R4C3730
Rev. C
A5 size
Chap2.fm
8/23/99
Pass 0
L
Proof Sign-off:
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Use the following table to set the paper thickness lever to match
the thickness of your paper.
Note:
❏
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
❏
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Paper type*
Lever position
Ordinary continuous paper
-1 or 0
Thin paper
-1 or 0
Carbonless multipart forms with:**
2 parts (or 1 copy)
3 parts (or 2 copies)
4 parts (or 3 copies)
5 parts (or 4 copies)
1
2
3
5
Continuous paper with labels***
2
* See Appendix C for complete paper specifications.
** It is recommended that multi-part forms be used with the optional
tractor unit installed in the front push or pull position.
*** Continuous paper with labels cannot be used with the rear push
tractor. To use them, install the optional tractor unit in the front push
or pull position.
