Getting to Know Your Printer
7
R4C3730
Rev. C
A5 size
Intro.fm
8/23/99
Pass 0
R
Proof Sign-off:
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Using the push and pull tractors in combination
To improve continuous paper feeding and reduce paper jams,
you can use two tractors at the same time. This is especially
helpful for printing on continuous pre-printed forms, multipart
forms, or labels, and for printing high-quality graphics. When
using two tractors in combination, you can load paper either in
the front paper slot onto the front push tractor and the pull
tractor, or in the rear paper slot onto the rear push tractor and
the pull tractor.
Note:
For more information on using two tractors in a push and pull
combination, see page 2-27.
Combination
Description
rear push
and pull
To use the rear push tractor with the pull tractor, you
need to purchase the optional pull tractor
(C80032
✽
) and install it in the pull position.
Note:
Because thick multipart forms require a straight
paper path, load them in the front slot.
Caution:
Do not load continuous paper with labels onto
the rear push tractor even when it is used in
combination with the pull tractor. If you load
continuous paper with labels onto the rear push/pull
tractor, the labels may come off their backing sheet
inside the printer and cause a paper jam.
front push
and pull
To use the front push tractor with the pull tractor, you
need to purchase two optional pull tractors
(C80032
✽
). Mount the two tractors in the front push
and pull positions.
g2-8aa4.eps
g2-8aa1.eps
