Epson 1735W - PowerLite WXGA LCD Projector, User Manual

Page: 68 / 159

68
Setting Up Network Projection
5. Check your wireless card’s or adapter’s device settings.
(Depending on the type of card or adapter you’re using, some of
the settings may be different than those listed here.)
■
Set the Network Type to
Infrastructure
.
■
Set the SSID to match the name assigned to the access point
(which should also be the projector’s SSID).
■
Make sure Encryption is
Disabled
if you have not set up
encryption on the projector.
6. Click the
General
tab and make sure that your wireless card or
adapter is enabled.
7. When you’re done, click
OK
to close the wireless properties dialog
box.
8. Right-click the
Wireless Network Connection
icon again and
select
Properties
. You see this screen: