Epson 1735W - PowerLite WXGA LCD Projector, User Manual

Page: 117 / 159

Maintaining the Projector
117
Cleaning the Air Filter and Vent
Your projector includes an air filter to ensure the best performance. If
dust collects on the air filter (on the side of the projector) or vent (on
the front of the projector), clean them as described below. Dust clogs
prevent proper ventilation and can cause overheating and damage the
projector.
Follow these steps:
1. Turn off the projector. Wait for the
P Power
light to stop
flashing, then unplug the power cord.
2. To clean the intake vent and filter, use a small vacuum cleaner
designed for computers and other office equipment. If you don’t
have one, gently clean the vent with a soft brush (such as an
artist’s paintbrush).
You can remove the air filter to clean both sides.
3. If the dirt is difficult to remove or the filter is broken, replace the
filter as described on page 120. Contact your dealer or call Epson
at 800-GO-EPSON (800-463-7766) to obtain a new filter.
note
To order replacement air
filters, request part number
V13H134A19. See page 12
for ordering information.
Exhaust
vent
Air filter