Epson 1705C - PowerLite XGA LCD Projector User Manual Download Page 137

Page: 137 / 202

Managing Projectors

137

Power status icons

The projector is powered on and its status is
normal.

The projector is powered off and its status is
normal.

The projector is powered on and its status is
abnormal.

The projector is powered off and its status is
abnormal.

Temperature level status icons

The projector’s internal temperature is normal (low).

The projector’s internal temperature is normal
(medium).

The projector’s internal temperature is normal
(high).

The projector’s internal temperature is high
(high-temperature warning).

The projector’s internal temperature is too high
(internal temperature error). The projector is turned
off automatically.

Error status icons

Lamp life warning. The lamp is nearing the end of
its life.

High-temperature warning. The projector is getting
too hot but continues to operate.

Replace air filter.

No air filter. The air filter is not installed or installed
incorrectly.

Low air flow. The air filter needs to be cleaned or
replaced.

Summary of Contents for 1705C - PowerLite XGA LCD Projector











































































































































































































Search results

Summary of Contents for 1705C - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1705C - PowerLite XGA LCD Projector

Brands by name

Popular brands

Epson 1705C - PowerLite XGA LCD Projector, User Manual

Search results

Summary of Contents for 1705C - PowerLite XGA LCD Projector

Reviews:

Related manuals for 1705C - PowerLite XGA LCD Projector

Brands by name

Popular brands