Problem Solving
43
Problems with Paper Feeding
Too many copies are
printing.
Make sure that neither the Copies setting in your printer
software, nor the Copies setting in your application is set
for multiple copies.
Paper doesn’t eject fully or
is wrinkled.
■
If the paper doesn’t eject fully, you may have set the
wrong paper size. Press the
x
Copy
button to eject the
paper. Then select the correct paper size in your
application or printer software.
■
If it’s wrinkled when it ejects, the paper may be damp
or too thin.
Paper doesn’t feed correctly
or jams in the printer.
■
If paper doesn’t feed, remove it from the sheet feeder.
Then reload it against the right edge and slide the left
edge guide against the other side.
■
If paper jams, turn off your printer, open the cover,
and remove any paper that’s inside, including any
small pieces that may have torn off. Carefully reload
paper and press the
x
Copy
button.
■
If multiple pages feed at once, remove the paper and
fan the edges of the stack to separate the sheets. Then
carefully reload it.
If your paper loads incorrectly or jams frequently:
■
Use new, smooth, high-quality paper, loaded printable
side up.
■
Don’t load paper above the arrow mark on the left
edge guide.
■
Place the paper against the right edge and slide the left
edge guide against it, but not too tightly.
Summary of Contents for 1000 ICS
Page 1: ...EPSON 1000 ICS Basics ...
