Instruction Manual – 5
6. Pipette Operation
Attaching the Tips
• Attach the correct tip corresponding to the model number
displayed on the pipette pushbutton (Section 5).
• Position the pipette
vertically when
attaching tips.
• Push the pipette tip
on firmly using a slight
twisting motion to
ensure an airtight seal.
NOTE:
• Do not attach the tips with a rocking movement,
as this may damage the shaft or plunger.
Observe this
rule particularly with single channel pipettes of low
volume range.
• Never draw liquids directly into the pipette without
the tip attached.
Adjusting the tip ejector
The tip ejector can be adjusted by the user and can
accommodate most types of tips available on the market.
When using narrow tubes, it may be necessary to remove
the tip ejector.
✓
✕