Instruction Manual – 9
• When pipetting liquids with a different temperature
from the ambient temperature, it is recommended to
pre-rinse the tip several times prior to use.
• Do not pipette liquids with temperatures above 70°C.
NOTE:
When pipetting acids or corrosive solutions which
emit vapors, it is recommended to disassemble the shaft
and rinse the plunger and O-ring with distilled water after
finishing the pipetting operation.
8. Aspiration and Dispensing Instructions
1.
2.
3.
5.
4.
6.
Aspirating Liquid
1. Press the pushbutton to the first stop point.
Holding the pipette vertically, immerse the pipette tip
into the sample liquid to the recommended depth (for
recommended values see Section 7). If the pipette tip
is not immersed to the recommended depth or if the
pipetting pushbutton is rapidly released, air may enter
the pipette tip.
2. Release the pipetting pushbutton slowly and smoothly
to aspirate the sample. Wait one second and then
withdraw the pipette tip from the liquid.
CAUTION:
Do not touch the used tip.
