Instruction Manual – 3
4. Safety Recommendations
Long-term use of the pipette relies on correct method of use.
Please read and follow the instructions for use carefully.
Symbols used:
Danger, risk of injury.
NOTE
Risk of damage to the pipette or errors in pipetting.
NOTE:
• The pipette is designed for the transfer of liquids only
using the tip. Do not aspirate liquids without the tip
attached. The aspirated liquid should not enter the
pipette, as it may cause damage.
• Single-use tips reduce the risk of contamination of
samples.
• Keep the pipette clean, avoiding the use of abrasive or
corrosive cleaning agents (e.g., acetone).
• Keep the pipette upright when there is liquid in the tip.
• Only using the pipette in accordance with the
manufacturer’s instructions ensures the correct pipette
parameters are maintained.
• After replacing the plunger or the shaft, the pipette
should be calibrated.
• In the case of incorrect operation, the device should
be cleaned in accordance with the Instructions for use
or transferred to a service point.
• Ambient operating temperature is +5°C to 45°C.
• Ambient storage conditions (in the original packaging
during transport and short storage) is -25°C to 55°C.
When working with the pipette:
• Follow general work safety regulations regarding
hazards related to work in the laboratory.
• Take special care when pipetting aggressive substances.
• Use appropriate protective attire (e.g., clothing, goggles,
and gloves).
• Avoid pointing the pipette at yourself or others during use.
• Only use parts and accessories recommended by the
manufacturer.
