Web admin interface
31
VGA Broadcaster Lite User Guide
and can to be configured separately.
On the Web admin interface, select Frame Grabber to configure Frame Grabber
adjustments. The VGA Broadcaster Lite device automatically adjusts image capture
settings every time it starts up. The automatic image adjustment is repeated every 60
seconds during operation. You can change the interval between automatic
adjustments if you want them to occur more or less often. The capture settings
attempt to produce the best quality captured image for the equipment used in your
applications.
Normally you would not have to make manual image adjustments. However, you may
have special requirements or for other reasons have image quality problems that may
only be fixed by making image adjustments.
The Web admin interface contains most of the information that you need to make
image adjustments including a brief description of the effect of each adjustment and
the adjustment range.
-
To make an adjustment, add a value to one or more fields and select
Apply.
-
To clear any adjustments, delete the value from one or more fields and select
Apply. To have changes take effect, you must reboot the VGA Broadcaster
Lite device (see
“
Rebooting or Restarting
VGA Broadcaster Lite
”
)
.
You can
make more than one change before selecting Apply and rebooting.