Web admin interface
27
VGA Broadcaster Lite User Guide
3.
Follow the instructions for your operating system. If the operating system
supports adding more than one IP address, then you can add this IP
address as a second IP address instead of changing the current address.
4.
Start a web browser on the workstation and browse to:
http://192.168.255.250/admin/
5.
Enter the following:
User Name: admin
Password: (no password required)
6.
Press Enter. The Web admin interface opens. To change the VGA
Broadcaster Lite IP address, see
“
Changing the Network Configuration
”
.
7.
Don
’
t forget to restore the previous network system on your workstation once
you have completed your administration of VGA Broadcaster Lite.
Adding or Changing the Web admin Interface
Password
Initial factory settings are such that no password is set in the Web admin
interface. For security reasons, you should add a password to control access to
the administration interface functions. You can add a password or change the
password at any time.
Note: If you lose or forget the admin password you should contact your
reseller or Epiphan Technical Support for help to reset the device to factory
defaults.
To add a password to the Web admin interface
1.
Log into the Web admin interface.
2.
Select Admin Access.
3.
Enter and repeat the new password. The password is case sensitive and can
include up to 255 ASCII characters.
4.
Select Apply. The password changes and after a pause you are prompted to
log into the Web admin interface.
