Installation
16
VGA Broadcaster Lite User Guide
6
Reset
Button
Reset the device to factory default settings. To use this
button, disconnect power to the device, press and hold the
Reset button as you reconnect the power. The blue LED
lights up. Keep pressing the Reset button until the blue LED
turns off and the green LED lights up. Release the Reset
button. The VGA Broadcaster Lite device starts normally but
with all settings returned to factory defaults.
7
DVI In
Connect a DVI source to the VGA Broadcaster Lite device
using a DVI cable. You can also connect a VGA source using
a VGA to DVI adapter (included). To identify this cable please
see Figure 7 (
. If you want to
connect an HDMI (unencrypted) source, use an HDMI to DVI
cable (not included). To identify this cable please see Figure
8 (
When VGA Broadcaster Lite acts as a converter, use this
port for the signal input.
8
DVI Out
This port allows you to check the presence of the signal. As
VGA Broadcaster Lite features an active splitter for the
incoming video source, you can check the presence of the
signal and view it in a high quality. Connect a DVI monitor or
projector using a DVI cable or a VGA monitor using DVI to
VGA cable (included).
When VGA Broadcaster Lite acts as a converter, use this
port for the signal output.
9
Audio IN
Connect a microphone if you need to broadcast audio
stream.
10
Audio
OUT
Connect audio equipment (e.g. headphones or speakers) to
control whether audio stream is currently being captured by
VGA Broadcaster Lite. In case the device accurately captures
