Web admin interface
46
VGA Broadcaster Lite User Guide
To configure unicast transmission:
1.
Select the Enable RTP/UDP stream checkbox.
2.
Use the Destination IP field to enter the IP address of the target host.
3.
Fill in other fields as required.
A multicast stream provides one-to-many communication over an IP infrastructure in a
network. In a Multicast configuration the Broadcaster Lite sends a packet only once to
a router that supports multicasting, and this router distributes the packets to client
nodes using a multi-cast protocol. Sending multicast stream requires equipment that
supports multi-casting, configuring your network and special Broadcaster settings.
Multicast architectures are used predominantly within a high bandwidth corporate LAN
and not on Internet based architectures. Multicast RTP stream is not usually
propagated outside the LAN (though it may be propagated through VPNs connecting
several LANs). Multicast transmission is available during RTP streaming.
To configure multicast connection:
1.
Select the Enable RTP/UDP stream checkbox.
2.
Use the Destination IP field to enter the IP multicast group address.
