Installation and Getting Started
Mac OS X video capture workstation installation
Page 14
Frame Grabber
To start the Mac OS capture application
1
On the video capture workstation, run the capture application.
From the Applications folder, select
VGA2USB.app
.
The capture application starts up.
If the Frame Grabber is connected and powered on, the
capture application should automatically find the Frame
Grabber and begin displaying captured images (see
If the Frame Grabber is operating but not capturing images the
device name and serial number should appear in the title bar
and the capture application displays
No signal detected
. The
status bar should display the IP address of the Network Frame
Grabber.
If the capture application displays
Capture device not found
the capture application cannot find the Frame Grabber.
If you have added a viewer password to a Network Frame
Grabber, you will be prompted to enter the password before
the image being captured by the device appears in the capture
window.
2
You can select
View > Show Device List
to view the Frame
Grabber devices that the capture application has found.
If you have more than one Frame Grabber, you can select the
one to connect the capture application to from this list.
3
If you have a Network Frame Grabber you can also select
File > Open Network Grabber
to select or enter the IP address
of a Network Frame Grabber to connect to.
See
“Troubleshooting a Windows installation” on page 41
for
information about troubleshooting the installation.
