Installation and Getting Started
Windows video capture workstation Installation
Page 10
Frame Grabber
4
Run the Setup Utility (setup.exe) and follow the prompts to
install the software.
The Windows drivers and application software is now
installed. The next step in the installation is to connect your
Frame Grabber.
To connect the Frame Grabber
Note:
Skip this step if you are installing PCIe Frame Grabber.
1
Use of the following sections to connect you Frame Grabber
and then return to the following procedure to complete the
installation.
•
“Connecting USB Frame Grabbers” on page 15
•
“Connecting Network Frame Grabbers” on page 21
•
“Connecting KVM Frame Grabbers” on page 32
Note:
If, after connecting a USB or PCIe Frame Grabber, Windows
displays the Found New Hardware Wizard, respond to the
prompts before continuing.