Installation and Getting Started
Connecting KVM Frame Grabbers
Page 36
Frame Grabber
Note:
The KVM2Ethernet devices will not capture images until a
video capture workstation has found the device on the network
and an application is requesting captured images. Even if the
device is properly connected to a KVM source the red LED will
not flash unless a video capture workstation is receiving captured
images.
KVM2Ethernet Software Features
Use the following software features to install the VGA2Ethernet
or KVM2Ethernet device on your network.
Default IP
address and
network mask
IP:
192.168.255.250
Netmask:
255.255.255.252
IP address
from a DHCP
server
The device can get an IP address on the
network from a DHCP server if the network
has one. If the device gets an IP address from a
DHCP server, the capture application and
Network Discovery tool can automatically find
the device on the network.
Web admin
interface
Use the Web admin interface for changing the
IP address, making device Adjustments, and
installing new firmware. You can log into the
Web admin interface by selecting
Web config
from the Network Discovery Utility or by
opening a web browser and browsing to:
http://<KVM2Ethernet_IP_Address>
User Name:
admin (no password)