Owner's Manual for EPILOG Legend Model 6000
December, 2000
Section 9 – Network Printing
45
The following window will appear:
10)
Type 192.168.98.1 into the “Address:” box.
Very Important Note* - The most likely cause of print failure through the network connection is caused
from the number in the “Address:” box being different from the number in the “IP Address” box in your
Legend laser. They must match exactly.
11)
Select the “Protocol” down arrow and select “LPR/LPD”. The “Port” setting will automatically
be properly set to 515.
12)
Click on the “Add Destination” button.
The address that you typed in above window will be displayed in the “Destination(s):” box.
13)
Single click on the address in the “Destination(s):” box to highlight the address.
