Epever TRIRON N Series, User Manual

Page: 34 / 60

28
Step 1: Press the button for the setting interface.
Step 2: Press the button and hold 5s for the load working mode interface.
Step 3: Press the or button to set the working mode..
Step 4: Press the button to confirm the parameters.
NOTE
：
Please refer to chapter 5.2 for the load working mode.
4.2 Interface modules
4.2.1 Interface type
Interface Interface type
Output
voltage/current
Short circuit
protection
USB output interface Standard USB 5VDC/2.2A(Total) Yes
RS485 com. interface RJ45 5VDC/100mA Yes
Relay interface 3.81-2P 30VDC/1A NO
4.2.2 Double USB (USB1)
USB output interface
：
Charging for phone, pad and so on. Max. charging current is 2.2A(total).
NOTE
；
USB interface output voltage/current available when the load is ON.
4.2.3 USB COM Slave (UCS)
USB output interface
：
Charging for phone, pad and so on. Max. charging current is
2.2A(total). NOTE
；
USB interface output voltage/current available when the load is
ON.
RS485 interface: View working status and view/modify working parameters via APP or
PC software.