Epcom EFFIO-P, User Manual

Page: 61 / 65

60
The status of Camera operation: Bit5 & Bit4 are the flags of Day & Night Control Mode
Status
Explanation
Bit5 Bit4
0 0
Camera’s Day & Night Control Mode is “Day & Night DAY Mode”.
0 1
Camera’s Day & Night Control Mode is “Day & Night NIGHT Mode”
1 0
Camera’s Day & Night Control Mode is “Day & Night AUTO Mode” and the
status of Camera’s Day & Night Control is “Day Mode”.
1 1
Camera’s Day & Night Control Mode is “Day & Night AUTO Mode” and the
status of Camera’s Day & Night Control is “Night Mode”.
Set Day & Night Data
This command is to set the camera’s Day & Night data.
PC
→
Camera
0xC5 0x0F Day_&_Night_Index Data CAM_ID C.S.
Camera
→
PC
0xC5 0x0F Day_&_Night_Index Data Day_&_Night_Index 0xXX 0xXX 0xXX C.S.
Day & Night
Index
Data Explanation
0x00 SENSOR LEVEL
The SENSOR level is setting up threshold for turning the
filter according to sensitivity of SENSOR.
0x01 FILTER DELAY Delay time for turning the filter
Other Values No Operation
Read Day & Night Data
This command is to see the camera’s Day & Night data.
PC
→
Camera
0xC5 0xF0 Day_&_Night_Index 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0xF0 Day_&_Night_Index 0x00 Data 0xXX 0xXX 0xXX C.S.
Day & Night
Index
Data Explanation
0x00 SENSOR LEVEL
The SENSOR level is setting up threshold for turning the
filter according to sensitivity of SENSOR.
0x01 FILTER DELAY Delay time for turning the filter
Other Values No Operation
9.3 Key Code Table
Key Variable
Key
Code
Description
KN_NOT 0x00 No key function will operate.
KN_TELE 0x01
Perform Zoom Tracking to TELE side by slow speed. In case of
displaying the MENU, it operates as the “MENU selection scroll
up“.
KN_HTELE 0x02 Perform Zoom Tracking to TELE side by high speed. In case of