34
White Balance Mode Setting
Set the mode of White Balance according to WB_CNT.
PC
→
Camera
0xC5 0xAA 0x65 WB_CNT CAM_ID C.S.
Camera
→
PC
0xC5 0xAA 0x65 WB_CNT 0x65 0xXX 0xXX 0xXX C.S.
WB_CNT: This is an index counter to change the mode of White Balance
1.
In case of WB_CNT = 0, the mode of White Balance becomes “AUTO” mode.
2.
In case of WB_CNT = 1, the mode of White Balance becomes “Anti-CR”
mode.
3.
In case of WB_CNT = 2, the mode of White Balance becomes “INDOOR”
mode.
4.
In case of WB_CNT = 3, the mode of White Balance becomes “OUTDOOR”
mode.
5.
In case of WB_CNT = 4, the mode of White Balance becomes “MANUAL”
mode.
6.
In case of WB_CNT = 5, the mode of White Balance becomes “PUSH AUTO”
mode.
7.
In case of WB_CNT = every other value, the mode of White Balance remains
unchanged.
Camera ID Display Mode ON/ OFF Toggle control
Switch the display mode of camera ID (ON/ OFF).
PC
→
Camera
0xC5 0xAA 0x6A 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0xAA 0x6A 0x00 0x6A 0xXX 0xXX 0xXX C.S.
Caution: If the Camera ID is “OFF” mode, then the Camera ID is not
displayed.
Zoom Lens Position Read
Read the current position value of Zoom lens & Digital Zoom MAG data.
PC
→
Camera
0xC5 0x36 0x00 0x00 CAM_ID C.S.
Camera
→
PC
0xC5 0x36 0x00 0x00 1 ZP_CNT V_MAG 0xXX C.S.
1.
1: Upper byte of Zoom lens position.
2.
ZP_CNT:
Lower byte of Zoom lens position.
3.
V_MAG:
Digital zoom data.
Summary of Contents for EFFIO-P
Page 65: ...64 MEMO...
